|
Beams available in 1" increments. All
capacities are expressed in pounds per
pair of beams. Only gravity loading and
the RMI required impact have been
considered. All values are based on a
uniformly distributed product load (i.e.
each beam carries 50% of load) and
assume proper installation and no
damage. The deflection limit for all
beams is length divided by 180. Beams
that are longer than 150" require
crossbars, lateral ties, wire decks or
some other type of lateral restraint.
Values in the table are for beam bending
only. Shear on the connectors and weld
strengths, etc. are not taken into
consideration. Capacities include 12.5%
impact for two pallets side by side. For
a three-pallet wide shelf, the values
should be multiplied by 0.95. For one
pallet per shelf the values should be
multiplied by 0.90. FOR ADDITIONAL SIZES
OR CAPACITIES PLEASE CALL YOUR SALES
REPRESENTATIVE OR 1-800-862-7261.
|
