Pallet Flow Metal Stops

Pallet Flow Metal Stops – Engineering Bulletin

The new UNARCO Pallet Flow Steel Ramp Stops and Pallet Hold parts are now available for the pallet flow application. These are also available in the quote program. Listed below are the different types that we offer and hardware required. We will no longer be providing the plastic stop on any of the pallet flow rail.

The Metal Pallet Flow Ramp Stops will be used instead of the plastic stops.

The Ramp Stops are:

  • Single Wheel Pallet Flow (Wheels In-line 2” centers) =
  • C94 7 RAMPSTOP P (requires Hardware = (2) P14 X 3-3/4 Bolt & (2) P14 Lock Nut)
  • Staggered Wheel Pallet Flow (Wheels Staggered on 1.5” centers) =
  • C95 7 RAMPSTOP P (requires Hardware = (2) P14 X 4-1/2 Bolt & (2) P14 Lock Nut)
  • Staggered Wheel Pallet Flow (Wheels Staggered on 2” centers) =
  • C96 7 RAMPSTOP P (requires Hardware = (2) P14 X 4-1/2 Bolt & (2) P14 Lock Nut)

The Pallet Holds should be used only in a return lane application. The user will set a pallet in the return lane such that the pallet will rest on top of the flat section causing a friction of the pallet against the pallet hold temporarily. The design of the Pallet Holds are so that when placing the first pallet in position, the user can align the pallet simply by pulling the pallet back against the vertical stops. After which, the user will continue stacking the pallets on top of the previous pallet until they deem there is enough pallets stacked. To release the pallets to the discharge end of the return lane, the user will push or slide the stack off of the pallet holds so that a truck can pick them from the outside or charge side of the system.

The Pallet Holds are:

  • Single Wheel Pallet Flow (Wheels In-line 2” centers) =
  • C94 0 PALLHOLD P (requires Hardware = (2) P14 X 3-3/4 Bolt & (2) P14 Lock Nut)
  • Staggered Wheel Pallet Flow (Wheels Staggered on 1.5” centers) =
  • C95 0 PALLHOLD P (requires Hardware = (2) P14 X 4-1/2 Bolt & (2) P14 Lock Nut)
  • Staggered Wheel Pallet Flow (Wheels Staggered on 2” centers) =
  • C96 0 PALLHOLD P (requires Hardware = (2) P14 X 4-1/2 Bolt & (2) P14 Lock Nut)

Pallet Flow Metal Pallet Ramp Stop

Pallet Flow Pallet Stops for Single Wheel Pallet Flow and Staggered Wheel Pallet Flow

 

Visit Us On TwitterVisit Us On LinkedinVisit Us On Google PlusVisit Us On YoutubeVisit Us On Facebook