SLOPED LEG PALLET RACK REPAIR
UNARCO has developed a kit to repair
your existing frame and help prevent future damage. The Sloped-Leg upright pallet
rack repair kit, manufactured with structural steel, is designed to slope the front
post of the upright away from the aisle to prevent forklift damage which commonly
occurs in lower levels. Trained installers can complete the fix without having to
unload the rack, which saves time and minimizes disruption to daily operation.
Sloped-Leg pallet rack repair kits can be welded with all structural steel or with
a tubular front post. The reinforcing saddle connector is welded to the new frame
bottom and can be installed with bolts or field-welded in place. Existing uprights
must have side punching to secure bolts through or a T-Bolt through the front.
Structural "C" channel bracing connects to a back saddle which wraps around the
rear post of the upright. This bracket can also be bolted or field-welded, depending
on the existing upright punching.
Kits are manufactured to fit all major RMI manufacturers' product.
For proper fit, uprights should be measured and field dimensions sent to your sales
representative or UNARCO engineering.
|
