Straight-Leg pallet rack repair kits are available in
3x3 or 4x3 closed tube columns. The reinforcing saddle connector
is welded to the new frame bottom and can be installed with
bolts or field-welded in place. In the bolted option, the
existing uprights must either have side punching through
which the bolts are secured or a T-Bolt through the front.
Sturdy
structural channel bracing connects to a back saddle which
wraps around the rear post of the upright. This bracket
can also be bolted or field welded, depending on the existing
upright punching.
Kits are manufactured to fit all major RMI
manufacturers' product. For proper fit, uprights should
be measured and field dimensions sent to your sales representative
or UNARCO Engineering.
The Straight-Leg rack repair kit
is a versatile product which, unlike the slope-leg option,
will allow lower level beam placement and is an easy fix
to damaged rack with minimal interruption to your facility
operation.
Home || About Us || Contact || Products || Capabilities || Customers
Literature / Downloads || Distributors || Library || Links || Support || Sitemap
Pallet Rack || Pick Modules || Carton Flow || Pallet Flow || Push Back
Drive In / Drive Thru || Rack Repair || Retail || Capacities / Design
Application Wizard || Project Management
Rack Repair || Straight Leg || Sloped Leg || Repair Safety || Welded / Bolted |
